Recovery (Reinstallation) Of Sybase Ase 12.5 And Database Software - Nortel Call Center Server Installation And Maintenance Manual

July 2007
Recovery (reinstallation) of Sybase ASE 12.5
and database software
If you suspect that the Sybase ASE 12.5 server configuration or software is
unstable, you can uninstall the database software and configuration, and then
reinstall it while leaving the system software and configuration intact. You need
a database backup and a Platform Recovery Disk to perform this procedure.
Checklist for recovering Sybase ASE 12.5 and database software
Complete the following steps to perform this recovery procedure. To keep on
track during the procedure, take a photocopy of the checklist and check off each
step as you complete it.
Description
1 Prepare the system for reinstallation (see page 1067).
2 Import the database information from the Platform Recovery Disk
(see page 1068).
3 Reinstall and initialize the database software, including Sybase ASE
12.5 (see page 1068).
4 Restore the database contents (see page 1071).
5 Perform a Database Integrity Check on the restored database (see
page 1071).
6 Configure the system's software and database (see page 1071).
Preparing the system for reinstallation
Before you can reinstall the database software and restore the database, you
must uninstall the existing database software that you suspect is corrupted. You
can also prepare your backup data, if you do not already have it available.
Installation and Maintenance Guide for Windows 2003
Restoring data
✔
1067