Closing The Gate - Enterasys S Series Hardware Installation Manual

5. Close the gate to hold the SSA chassis in place. See
Ensure that the plungers lock into place when you close the gate. If the plungers are in the
open locked position, rotate the plungers clockwise until they unlock.
Figure D-5

Closing the Gate

1 Gate
6. Using the 10-32 screws included with the mounting bracket, secure the front of the SSA
chassis to the left of the mounting bracket. See
Figure D-5.
Figure D-6.
Enterasys S-Series Stand Alone (SSA) Hardware Installation Guide D-9
Mounting the SSA Chassis on a Wall