Enterasys Matrix 2G4072-52 Configuration Manual page 28

Startup and General Configuration Summary
Factory Default Settings
Table 2-1 Default Device Settings for Basic Switch Operation (Continued)
Device Feature
Community name
Convergence End
Points phone detection
EAPOL
EAPOL authentication
mode
GARP timer
GVRP
IGMP
IP mask and gateway
IP routes
Jumbo frame support
Link aggregation
admin key
Link aggregation flow
regeneration
Link aggregation
system priority
Link aggregation
outport algorithm
Link Layer Discovery
Protocol (LLDP)
LLDP transmit interval
LLDP hold multiplier
2-2 Matrix DFE-Platinum and Diamond Series Configuration Guide
Default Setting
Public.
Disabled globally and on all ports
Disabled.
When enabled, set to auto for all ports.
Join timer set to 20 centiseconds; leave timer set to 60 centiseconds;
leaveall timer set to 1000 centiseconds.
Globally enabled.
Disabled. When enabled, query interval is set to 125seconds and
response time is set to 100 tenths of a second.
Subnet mask set to 255.0.0.0; default gateway set to 0.0.0.0
No static routes configured.
Disabled on all ports.
Set to 32768 for all ports.
Does not apply to MATRIX E7.
Disabled.
Set to 32768 for all ports.
Set to DIP-SIP.
Both transmitting and receiving LLDPDUs are enabled.
30 seconds
4