Enterasys Matrix 2G4072-52 Configuration Manual page 33

Table 2-2 Default Device Settings for Router Mode Operation
Device Feature
Access groups (IP
security)
Access lists (IP
security)
Area authentication
(OSPF)
Area default cost
(OSPF)
Area NSSA (OSPF)
Area range (OSPF)
ARP table
ARP timeout
Authentication key
(RIP and OSPF)
Authentication mode
(RIP and OSPF)
Dead interval (OSPF)
Disable triggered
updates (RIP)
Distribute list (RIP)
DoS prevention
DVMRP
Hello interval (OSPF)
ICMP
Default Setting
None configured.
None configured.
Disabled.
Set to 1.
None configured.
None configured.
No permanent entries configured.
Set to 14,400 seconds.
None configured.
None configured.
Set to 40 seconds.
Triggered updates allowed.
No filters applied.
Disabled.
Disabled. Metric set to 1.
Set to 10 seconds for broadcast and point-to-point networks. Set to
30 seconds for non-broadcast and point-to-multipoint networks.
Enabled for echo-reply and mask-reply modes.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Startup and General Configuration Summary
Factory Default Settings
2-7