Show Ip Wccp Services - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip wccp services

Displays the list of service groups created on the switch and their related information.
show ip wccp services
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6850E, 6855, 9000E
Usage Guidelines
N/A
Examples
-> show ip wccp services
Service Status
-------+--------+--------+-----+-------+--------+----------+---------+-------------
95 Enable
output definitions
Service
Status
RcvId
Chgs
Caches
Type
Version
Password
Redirects
Release History
Release 6.4.4; command was introduced.
page 14-160
RcvId Chgs Caches
42 20 1
Indicates the WCCP service ID.
Indicates the admin status of the WCCP service.
Indicates the current Receive Id from the router for the WCCP service.
This is incremented every time a WCCP message is sent.
Indicates the current change number for the service. This gets updated
each time there is a WCCP topology change.
Indicates the total number of cache servers currently active on the
WCCP service.
Indicates the WCCP service type.
Indicates the WCCP service version.
Indicates if password has been specified for the WCCP service.
Indicates the number of packets WCCP has redirected for the service.
Type Version Password
Dynamic 2
OmniSwitch CLI Reference Guide
IP Commands
Redirects
Yes 0
June 2012