Table of Contents
Advertisement
9.
Set the values of the user circuit part parameters in the "User circuit part parameter setting" window.
[Menu] [FPGA parameter] [User circuit part parameter setting] <Detailed settings>
10.
Write the set parameters.
[Online] [Parameter write (Memory + Non-volatile memory)]
11.
Click the [Yes] button.
12.
Click the [Yes] button.
FPGA register change method
This section described the procedure to change the FPGA register setting while the FPGA module is running.
Operating procedure
1.
Use "Device/Register batch monitor".
[Menu] [Device/Register batch monitor]
2.
In "FPGA register", enter the address of the register to be set and click the [Start Monitoring] button.
3.
Click the current value to rewrite a desired value.
An FPGA register area assigned to a link device can be set by rewriting the value of the link device.
13 SAMPLE CIRCUIT IN STANDALONE MODE
374
13.2 When Using the Pulse Count Function
Advertisement
Table of Contents
Troubleshooting
