Applicable Systems - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

3.1

Applicable Systems

Supported master station
When using the FPGA module in CC-Link IE TSN communication mode, use the following products for the master station.
Model name
RJ71GN11-T2
RD78G64, RD78G32, RD78G16, RD78G8, RD78G4
RD78GHV, RD78GHW
Information on "Supported master station" described above is the ones at the point when this manual was issued.
For latest information, please visit the website of CC-Link Partner Association.
www.cc-link.org
Compatible software package
The table below lists the software packages compatible with the FPGA module.
Product name
GX Works3
FPGA Module Configuration Tool
For the FPGA Module Configuration Tool, please consult your local Mitsubishi representative.
FPGA development software
The table below lists FPGA development software that are used for FPGA design and whose operation has been verified.
Product name

Intel Quartus Prime

For Intel Quartus Prime, download it from the website below.
www.intel.com
Applicable profile
When the latest profile of the FPGA module is necessary, please consult your local Mitsubishi representative.
The profile is a setting file that stores information required for the start-up, operation, and maintenance of devices supporting
the CC-Link family.
A module is added to "Module List" of the "CC-Link IE TSN Configuration" window by profile registration to the engineering
tool of the master station.
For the profile registration, refer to the following.
 GX Works3 Operating Manual
Ethernet cables
For the specifications of the Ethernet cable, refer to the following.
 User's manual for the master station used
Switching hub
For compatible switching hubs, refer to the following.
 User's manual for the master station used
3 SYSTEM CONFIGURATION
26
3.1 Applicable Systems
Firmware version
No restriction
"05" or later
Software version
1.095Z or later
No restriction
Edition
Lite Edition (free)
Standard Edition
Software version
20.1.1
20.1.1