Chapter 12 Functions; Function List - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

12
FUNCTIONS
This chapter describes the details of the functions that can be used in the FPGA module and how to set them.
12.1

Function List

The following table lists the functions of the FPGA module.
Item
FPGA download function
FPGA configuration function
FPGA control function
FPGA register access function
Logging function
FTP client function
SLMP communication function
CC-Link IE TSN network
synchronous communication
function
Module power supply voltage
drop detection function
Firmware update function
12 FUNCTIONS
298
12.1 Function List
Description
Writes the created configuration data to the configuration ROM inside the FPGA
module.
The FPGA module performs FPGA configuration when:
• Upon power-on or remote reset
• During FPGA download
The FPGA standard circuit and user circuits can be started or stopped.
Reads from and writes to the FPGA register areas from the master station
program.
The logging part of the FPGA acquires the external input/output from the user
circuit, count values, and other sources at the timing of when the sampling
pulse is input, and writes them to DDR3L SDRAM.
Transfers logging data collected in DDR3L SDRAM to the FTP server.
SLMP can be used to communicate with the FPGA module.
Reads and writes to the FPGA at the synchronous cycle of a master station that
supports the CC-Link IE TSN network synchronous communication function.
This function detects a voltage drop of the module power supply.
Updates the FPGA module firmware via CC-Link IE TSN.
Reference
Page 300 FPGA Download Function
Page 311 FPGA Configuration Function
Page 315 FPGA Control Function
Page 321 FPGA Register Access
Function
Page 327 Logging Function
Page 340 FTP Client Function
Page 351 SLMP Communication
Function
Page 353 CC-Link IE TSN Network
Synchronous Communication Function
Page 360 Module Power Supply
Voltage Drop Detection Function
Page 361 Firmware Update Function