Appendices; Appendix 1 Details Of Remote Registers - Mitsubishi Electric NZ2GF-CCB User Manual

APPENDICES

Appendix 1
This section describes the details of remote registers for the master/local module.
The assignment of each device number is for when the start numbers of the remote registers of the bridge module are
RWr0 and RWw0.
(1) Bridge module operating status (RWr0)
In Bridge module operating status (RWr0), information in Module monitor area (read) of the module
monitor/control area (address: 8000
Device
RWr0
(a) Error flag (RWr0.b10)
If a moderate or major error (excluding a watchdog timer error) occurs, Error status flag (RWr0.b10) turns on.
When Error clear request flag (RWw0.b10) is turned on after the cause of the error is removed, Error code
(RWr1) becomes 0 and Error status flag (RWr0.b10) turns off.
Error code (RWr1)
Error status flag (RWr0.b10)
Error clear request flag
(RWw0.b10)
Remote READY
(RWr0.b11)
Details of Remote Registers
) is stored.
H
b0 to b9 Use prohibited
b10 Error status flag
b11 Remote READY
b12 Warning status flag
b13 to b15 Use prohibited
Executed in the bridge module
Executed by the program
A moderate or major
error has occurred.
0000 (Error code)
H
ON
ON
OFF
Description
OFF
ON
OFF
APPENDICES
0000
H
ON
103
A