Gx Developer Functions Supported By C64 Series; Function Support Conditions (General Section) - Mitsubishi Electric MELDAS C6 Programming Manual

1. PLC Development Environment Using GX Developer

1.1.3 GX Developer Functions Supported by C64 Series

The GX Developer functions explained here are those supported by the C64 Series in the "off-line
functions" operated with the GX Developer independently and "on-line functions" carried out
connected to the CNC controller.
Refer to the enclosed Operating Manual for details of respective functions.
Refer to "Appendix 3. Operation Methods Using GPPQ" for the GPPQ-specific functions and
operations when the DOS version "GPPQ" (SW2IVD/NX-GPPQ GPP function software package) is
used.

1.1.3.1 Function Support Conditions (general section)

The following shows a list of GX Developer outline functions supported by the C64 Series.
A mark indicates functions that can be used by the C64 Series. An r mark indicates that the
function cannot be used because it is related to "MELSEC Series" characteristic functions. The
function details during on-line are described in the next section.
List of general section functions (1)
Program type
Ladder
List
SFC
MELSAP-L
Function block
Function
Project
1.1 Function
Support
Menu
New project
Open project
Close project
Save
Save as
Delete project
Verify
Copy
Edit Data
Change PLC type
Import file
Export file
- 3 -
Get other manuals https://www.bkmanuals.com
: Possible, : Limitedly possible,
Remarks
Sub menu
New
Copy
Delete
Rename
Import from GPPQ format file
Import from GPPA format file
Import from FXGP[WIN] format file
Import from FXGP[DOS] format file
Export to GPPQ format files
Export to GPPA format files
Export to FXGP[WIN] format file
Export to FXGP[DOS] format file
Export to TEXT ,CSV format file
: Not possible
Support Remarks
Fixed Q4A