Table of Contents
Advertisement
Command line interface
Execute the config command and parameters at the root prompt. See
n
commands at the root Admin CLI prompt
Enter configuration mode by executing the config command without any parameters. See
n
Configuration mode
Execute configuration commands at the root Admin CLI prompt
You can execute the config command at the root Admin CLI prompt with any appropriate parameters.
When the config command is used in this way, changes to the device's configuration are
automatically saved when the command is executed.
For example, to disable the SSH service from the root prompt, enter the following command:
> config service ssh enable false
>
The IX10 device's ssh service is now disabled.
Note
When the config command is executed at the root prompt, certain configuration actions that
are available in configuration mode cannot be performed. This includes validating configuration
changes, canceling and reverting configuration changes, and performing actions on elements in lists.
See
Configuration mode
Display help for the config command from the root Admin CLI
prompt
Display additional configuration commands, as well as available parameters and values, by entering
the question mark (?) character after the config command.
1. For example:
> config ?
Will display the following help information:
> config ?
Additional Configuration
-------------------------------------------------------------------------
-
application
auth
cloud
firewall
monitoring
network
serial
service
system
vpn
Run "config" with no arguments to enter the configuration editing mode.
IX10 User Guide
Execute configuration commands at the root Admin CLI prompt
for more information.
for more information.
for information about using configuration mode.
Custom scripts
Authentication
Central management
Firewall
Monitoring
Network
Serial
Services
System
VPN
Execute configuration
831
Advertisement
Table of Contents
