Equipment Required - Digi TransPort WR44 v2 Testing Manual

2 EQUIPMENT REQUIRED

1. A PC connected to the Internet running a Microsoft Windows TM operating system with a built
in serial comm. port. (USB to serial adaptors do not work well.)
2. A 9-way to 9-way "straight through" serial cable to connect the PC directly to the WR44v2.
3. An Ethernet switch/hub to connect the PC to the WR44v2 (usually your normal office Ethernet
switch/hub will be fine if there is a spare port and it is NOT running spanning tree.)
4. CAT 5 cables to connect the WR44v2 and PC to the Ethernet switch.
5. A pen or paper clip which can easily de-press the WR44v2's reset button
How to test an WR44V2 step by step.
Page | 4