Parts Inventory (Packing List) For An Ex9208 Switch - Juniper EX9208 Hardware Manual

Parts Inventory (Packing List) for an EX9208 Switch

The switch shipment includes a packing list. Check the parts you receive in the switch shipping crate
against the items on the packing list. The packing list specifies the part number and provides description
of each part in your order. The parts shipped depend on the configuration you order. See
Switch Configurations" on page 8
If any part on the packing list is missing, contact your customer service representative or contact Juniper
customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or
direct-dial options in countries without toll-free numbers, see
requesting-support.html
NOTE: All line cards ordered are shipped separately. Line cards are not listed on the switch's
packing list.
NOTE: The base configuration is available only with AC power supplies. The redundant
configuration ships with either AC or DC power supplies.
Table 57 on page 150 lists the parts and their quantities in the packing list for a base configuration and a
redundant configuration switch.
Table 57: Parts List for Different EX9208 Switch Configurations
Component
Chassis, including the midplane and
front-mounting brackets
Routing Engine module (RE module)
Switch Fabric module (SF module)
Power supplies
for more information.
.
Base Configuration Quantity
1
1
1
One of the following:
•
3 low-line (100–120 VAC) AC
•
2 high-line (200–240 VAC) AC
https:/ /www.juniper.net/support/
Redundant Configuration Quantity
1
2
2
4 AC (low-line or high-line) or 4 DC
150
"EX9208