Modify Calibration Data
In this portion of program, you modify the CALIBRATION COEFFICIENT ARRAY, which is
contained in
.
Restore Modied Calibration Data
Line 440 opens the CALIBRATION COEFFICIENT ARRAY 1 in the analyzer. This array is used
to restore the data.
Lines 450 and 460 send the le header (
), calibration data (
) and the terminator
(
). The le header is an input in line 370.
This example sets the trigger to HOLD at line 120. The analyzer does not redraw the trace
with the new CALIBRATION COEFFICIENT ARRAYS when the trigger is set to HOLD. You
can redraw the trace by issuing the GPIB command
. For details, see the \Redrawing
Measurement Trace with Modied Calibration Data" description.
Writing Data Arrays to the Analyzer
5-3