Table of Contents
Advertisement
Serial baud rate
The serial port baud rate setting allows you to manually set the data rate for the
RS-232 serial port. In most cases, you will not have to change this setting
because ScopeData Pro automatically controls the data rate when
communicating with the WireScope 350 over the serial port.
To manually change the serial port data rate, from the System Settings screen,
select Serial Baud Rate and press
or the Edit button.
Restore Default Settings
You can quickly restore all of the WireScope 350 settings to the factory default
values.
To restore the default settings, from the System Settings screen, select Restore
Default Settings and press
or the Edit button.
Chapter 15
WireScope 350 System Settings 132
Advertisement
Table of Contents
