NOTE
Step 1. Press the
Step 2. Press the
Step 3. Press the
Figure 2-10
Working with Markers
The marker functions only apply when you are working in graph format.
The Noise Figure Analyzer features four independent markers.
and
Marker(1⇑ )
Marker(2⇑ )
and
and
Marker(3⇓)
Marker(4⇓)
Selecting Markers
To select a marker:
key.
Marker
menu key to select the marker of interest.
Marker
menu key and press the
State
One Marker in Normal State
Turn the RPG to place the marker at the point on the trace you want to
measure or use the numeric keys to enter the frequency of interest.
Chapter 2
Making Basic Measurements
Displaying the Measurement Results
are associated with the upper graph trace,
are associated with the lower graph trace.
Normal
menu key to highlight it.
43