Figure 1-18 Example of a Fixed Reference Marker Using (∆)REF=(∆)FIXED MKR
To Couple and Uncouple Display Markers
At a preset state, the markers have the same stimulus values on each channel, but they
can be uncoupled so that each channel has independent markers.
Press
Marker Fctn
MARKER MODE MENU
• Choose
MARKERS: COUPLED
values for the display channels.
• Choose
MARKERS: UNCOUPLED
stimulus values for the display channels. This allows you to control the marker
stimulus values independently for each channel.
Figure 1-19 Example of Coupled and Uncoupled Markers
and select from the following keys:
if you want the analyzer to couple the marker stimulus
if you want the analyzer to uncouple the marker
Making Measurements
Using Markers
1- 31