Table of Contents
Advertisement
The Listing Menu
Markers Field
Markers Field
The Markers field may appear in different locations depending on the menu
you are in. Regardless of its location, the Markers field is always used to
access a marker selection menu.
See Also
"Markers and Stop Measurements" chapter found later in this reference for
complete information on marker and stop measurement operations.
Data Roll Field
The column of numbers at the far left represents the location of the acquired
data in the analyzer's memory. The numbered positions are also known as
the state locations and are relative to the trigger state location.
The data can be rolled to display other data by using the data roll field. The
data roll field is the small rectangular box located in the middle of the state
location column.
The data roll field is used to either roll the data listing or to select an exact
state for display. When the data roll field is light blue, the knob is active and
can roll data in either direction. If you select the data roll field when it is
light blue, a pop-up keypad appears for the number of an exact state. When
the pop-up keypad is used, the data listing shifts, leaving the selected state in
the light blue data roll box.
Data roll field
Listing Menu with Data Roll Field
5–3
Advertisement
Table of Contents
