Table of Contents
Advertisement
6. PSWD (Password Change)
M90 Series Portable Data Entry Unit Reference Manual
1. RESUME
This resumes processing from where it was when the M90 was shut down.
If off, the M90 will perform a warm start each time it is powered on. Press
A or " to toggle between "ON" (default) or "OFF," then press
[ENT SCAN] to return to the System On/Off screen. Press and release
[FN], then " to return to this screen without changes.
< RESUME SET >
RESUME
ON
_
2. AUTO-OFF
This sets the timeout period from 1 to 9 MINS (minutes), or DISABLE.
Default is 3 MINS (3 minutes). The unit remains on until [S1] and [FN]
are pressed (off). Press A or " to toggle among the values, then press
[ENT SCAN] to return to the System On/Off screen. Press and release
[FN], then " to return to this screen without changes.
< AUTO-OFF SET >
AUTO-OFF
3 MINS
_
Select option 6.PSWD from the Supervisor Mode menu for the supervisor
password which prevents unauthorized users from entering the Supervisor
Mode and changing configuration parameters. Use up to ten alphanumeric
characters ("A"-"Z", "a"-"z", "0"-"9") for the password. Press
[ENT SCAN] to save or press and release [FN], then " to exit without
changes.
OLD PASSWORD:
M90
NEW PASSWORD:
_
—
Chapter 3
Operation Modes
37
Advertisement
Table of Contents
