Temperature Status - Stratasys F170 User Manual
F123 series shared office 3d printers
Hide thumbs
Also See for F170:
- Operation and maintenance manual (91 pages) ,
- Site preparation manual (22 pages)
Table of Contents
Advertisement
TEMPERATURE STATUS
OVEN TEMPERATURE
The oven's temperature can be viewed via the Maintenance page. To locate this information:
1.
Press the Tools button within the Navigation Menu; the Tools page will be displayed.
2.
Press the Maintenance button within the Tools page; the Maintenance page will be displayed.
3.
Locate the Chamber row within the page. The printer's current and set point oven chamber
temperatures are displayed within this row.
Figure 5-27:
HEAD TEMPERATURE
To view temperature information pertaining to the model and support heads within the Materials page:
1.
Press the Materials button within the Navigation Menu; the Materials page will be displayed.
2.
The Display Area of this page contains two Head Status Icons, one corresponding to the model
head and the other corresponding to the support head. (See
details). The head's current temperature as compared to its set point temperature is displayed
within the lower portion of the icon.
3.
Touching one of these icons on the screen will open that head's Head Details page. The same
temperature information is displayed within this page for both the model and support heads.
Figure 5-28:
Maintenance Page Oven Chamber Temperature
Materials Page Head Temperatures
"Head Status Icons" on page 61
138
for
Advertisement
Table of Contents
