Mounting The Flexpendant Holder - ABB IRC5 Product Manual

2.4.4. Mounting the FlexPendant holder

Location
The placement of the FlexPendant holder is shown in the illustration below.
xx0500002542
A
B
NOTE!
In order to avoid drop of the FlexPendant from high levels, the location of the FlexPendant
holder on top of the control cabinet is recommended only with one single cabinet. Otherwise
according to location on the control cabinet door.
Required equipment
Equipment
Standard tool kit
FlexPendant holder
3HAC021313-001 Revision: P
2 Installation and Commissioning, IRC5
FlexPendant holder mounted on top of the control cabinet.
FlexPendant holder mounted on the control cabinet door.
Art.no
3HAC033610-001
2.4.4. Mounting the FlexPendant holder
Note
The contents are defined in
section, Standard Toolkit.
Continues on next page
45