Table of Contents
Advertisement
17 Problem Solving
The Print Result is Not What was Expected
The 2-sided printing is not
available.
The document is printed on a
different paper size than
specified.
The image on the document
edges is missing on the
output.
The printed font differs from
the font specified on the
computer.
Printing is slow.
The specified print options
are not enabled.
The document edges are
missing on the printout.
The print color differs from
before.
Black lines are printed.
430
Symptom
The memory of the device is insufficient. Set [Image Quality] to
[Standard] using the print driver. Also, set the port that is not used
to [Disabled].
Change the size of paper in the tray, or change the print option to
specify a tray that contains the correct sized paper.
Expand the printable area of the device, or reduce the image size
on the printout.
Check the font replacement table of the print driver.
Reference
When image data, such as photos, is printed with the high
resolution, the print speed becomes slow. Select [Standard] for
[Image Quality].
Install the appropriate print driver. Check if the print driver of your
model is displayed on the [Advanced] tab of the print driver's
properties.
Check the optional components installed on the device, and set
[Installable Options] under [Configuration] in the print driver again.
Expand the printable area of the device, or reduce the image size
on the printout.
Execute auto calibration.
Reference
Install the appropriate print driver. Check if the print driver of your
model is displayed on the [Advanced] tab of the print driver's
properties.
Refer to the print driver help.
Refer to "Executing Calibration" (P.406).
Remedy
Advertisement
Table of Contents
