Table of Contents
Advertisement
8
Click [Close] after the import has finished.
Step2 Configuration of IPsec
The following describes configuration procedures to set up IPsec on the device.
1
Tap [Device] on the Home screen.
2
Tap [Connectivity & Network Setup] > [Security Settings].
3
Tap [IPsec Settings] > [IPsec Settings].
4
Tap [IKE Authentication Method] to set the IKE authentication method.
For Digital Signature Method
1) Select [Authenticate by Digital Signature].
2) Tap [Device Certificate].
3) Select the certificate to use for authentication, then tap [OK].
For Preshared Key Method
1) Select [Authenticate by Preshared Key].
2) Tap [Preshared Key].
3) Enter the text string to become the preshared key, then tap [OK].
5
Tap [IPsec Communication] then select [Enabled].
6
Configure other settings as required.
Reference
For details on the settings, refer to "[IPsec Settings]" (P.319).
Step3 Communication Destination Device Settings
This section explains the settings of the party being communicated with.
The necessary settings are as follows:
Create an IP security policy
Assign the IP security policy
Reference
For information on how to set above settings, refer to the help of the communication destination device.
Configuration of Encryption Using IPsec
347
Advertisement
Table of Contents
