Table of Contents
Advertisement
13 Advanced Settings
[App Settings]
[Copy Settings]
[Preset Buttons]
[Reduce / Enlarge - Button 3], [Reduce / Enlarge - Button 4]
Changes the preset of buttons prepared for [Reduce / Enlarge] on the feature list.
Select the setting value to assign to the buttons from ones registered with [Reduce /
Enlarge Presets].
Reference
For how to set [Reduce / Enlarge Presets], refer to "[Reduce / Enlarge Presets]" (P.268).
[Bypass Tray Preset 1] to [Bypass Tray Preset 4]
Register the preset displayed on Tray5 (Bypass) of the [Paper Supply] screen.
Place the check mark on [Enabled], and set [Preset Name], [Paper Size], and [Paper Type].
[Copy Control]
You can configure settings related to copy operation control.
[Memory Full Procedure]
If the shortage of storage occurs while scanning an original, a screen appears asking how
you want to handle the partially stored data.
Set the process you want the device to perform for the partially stored data after a certain
time has elapsed in the confirmation screen.
Reference
You can set the time until the memory full procedure is carried out. For more information, refer to "[Auto Job
Release]" (P.249).
[Maximum Stored Pages]
Set the maximum number of pages stored for a copy document.
[Auto Paper Off]
Select the tray used when [Auto Select] of [Paper Supply] in the [Copy] screen is cancelled.
Note
[Auto Select] of [Paper Supply] is cancelled when [Auto %], [Auto] for [Independent X - Y%], or [Fit Image to
Paper Size X-Y%] is selected.
[Mixed Size Originals - 2 Sided Copy]
Specify paper to copy side 2 of a document: in 2 sided copying, if the size of side 1 and side
2 of a document is different, and the device detects different paper size for sides 1 and 2.
Important
When the side 1 and side 2 are different sizes and if the side 2 is copied on the sheet on which the side 1 has
been printed, a part of the image may be missing.
[Copy to New Sheet]
Side 2 is copied as side 1 on a new sheet of paper.
266
Advertisement
Table of Contents
