Fuji Xerox ApeosPort-VII C4421 User Manual page 261


When an error occurs during generating an image log, the device operates in accordance with the setting of
[Image Log Generation] > [Assurance Level] as follows.

[High]: Replaces the image to an error image (1x1 pixels) and indicates a system error. Turn off the device
and confirm that the control panel is lit off, and then turn on the device again.
 [Low]: Replaces the image to an error image (1x1 pixels) and records the error information after finishing
the job.
 Up to 2000 image logs can be stored in the device.
 The text size of image logs differs depending on the setting of [Resolution] under [Image Log Generation].
Refer to the following table when you set the resolution.
Resolution
200 dpi
100 dpi
72 dpi
50 dpi
25 dpi
[Image Log Control]
Set whether or not to use the Image Log Control feature.
[Image Log Target]
Set whether or not to create image logs per job type.
[Image Log Generation]
Set the image data to manage as an image log. One image log file (PDF format) is created
per one job.
 [Assurance Level]
Set the assurance level, which affects whether to surely create image logs, from [Low] and
[High].
Note

If you select [Low], image logs may not be created depending on the conditions.
 [Resolution]
Set the resolution of images to be managed as the logs.
 [Page Range]
Set the page range of images to be managed as the logs.
[Transfer Image Log]
Image logs created on the device can be transferred to a log management server for
storage and management.
 [Log Transfer]
Set whether or not to transfer an image log to a log management server with the Log
Transfer feature.
Size for Color Size for B&W
Jobs Jobs
6 pt 6 pt
10 pt 14 pt
12 pt 18 pt
16 pt 24 pt
24 pt 32 pt
[System Settings]
Remarks
Adequate level for normal document.
Large size characters are legible.
Title size characters are legible.
Characters are illegible. Suitable for
Preview.
Characters are illegible. Suitable for
Thumbnail view.
261