Table of Contents
Advertisement
[Primary Server - Port Number]
Set the Primary server port number.
Important
Do not use the numbers assigned to the other ports.
[Secondary Server Name / Address]
Enter the secondary server name or IP address.
[Secondary Server - Port Number]
Set the secondary server port number.
Important
Do not use the numbers assigned to the other ports.
[Authentication Method]
[Direct Authentication]
Uses the user ID and password entered by a user for LDAP authentication.
[Authentication of User Attributes]
Uses the entered user ID as an attribute specified in [Attribute of Typed User Name] to
perform a search on the LDAP server. [Attribute of Login User Name] of a user found
through the search is used as the user ID of a job and the owner of a job flow sheet and a
folder.
[Attribute of Typed User Name]
When [Authentication of User Attributes] is used for LDAP authentication, set the attribute
of the user ID entered.
Set the attribute of the User Attribute information registered on the LDAP server that
corresponds to the value to be entered as the user name from the control panel. For
example, when you want a user to enter the mail address, set "mail."
[Attribute of Login User Name]
Enter an attribute to be used for LDAP authentication using User Attribute information
registered on the LDAP server.
[Use Added Text String]
Select whether or not to automatically add text strings in [Text String Added to User Name]
when you enter the authentication information from the control panel.
[Text String Added to User Name]
Enter text strings for [Text String Added to User Name] when you use additional text
strings.
When [Use Added Text String] is set to [Enabled], enter the corresponding fixed text string.
For Example:
When "mail" is set for [Attribute of Typed User Name] and the information registered for
the target user is "mail@myhost.example.com," you will need to enter
"mail@myhost.example.com".
However, if [Use Added Text String] is set to [Enabled] and "@myhost.example.com" is
specified for [Text String Added to User Name], you will only need to enter "mail" from the
control panel because the device adds "@myhost.example.com" to the end of the string.
[Connectivity & Network Setup]
313
Advertisement
Table of Contents
