Table of Contents
Advertisement
[SMTP - SSL/TLS Communication]
Configure the SSL/TLS communications.
Note
The Internet Fax Direct (P2P) feature does not support SMTP-SSL/TLS communication.
[Disabled]
The device does not communicate in SSL/TLS.
[STARTTLS (If Available)]
The device verifies the certificate and communicates in SSL/TLS. If the verification fails, the
device does not communicate in SSL/TLS.
[STARTTLS]
The device verifies the certificate and communicates in SSL/TLS. If the verification fails, the
device cannot perform communication.
[SSL/TLS]
The device communicates in SSL/TLS.
[ThinPrint - SSL/TLS Communication]
Select whether or not to enable the SSL/TLS communications.
[Device Certificate - Client]
Select a certificate for HTTP SSL/TLS communications.
[Verify Remote Server Certificate]
When the device is operated as an SSL client, select whether or not to verify the certificate
of the remote server.
[S/MIME Settings]
Configure the S/MIME settings to use encryption or signature option on the transmission of
email or fax.
[Device Certificate - S/MIME]
Select a certificate for S/MIME communications.
Reference
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.339).
[S/MIME Communication]
Select whether or not to enable S/MIME communications.
[Receive Untrusted Email]
If you select [No], the device does not receive the following email:
Emails other than email sent by S/MIME when [S/MIME Communication] is set to
[Enabled].
Emails that fail to attach a signature or verification.
Emails that are attached with an expired certificate.
[Receive Untrusted Internet Fax]
If you select [No], the device does not receive the following Internet fax:
[Connectivity & Network Setup]
317
Advertisement
Table of Contents
