The Print Result Is Not What Was Expected - Fuji Xerox ApeosPort-II C4300 User Manual

15 Problem Solving

The Print Result is Not What was Expected

Follow the procedure below if the print result is not what was expected.
Cannot print in color.
Documents are not
stapled.
15
The 2-sided printing is not
available.
The document is printed
with a different paper size.
The document edges are
missing on the output.
The font differs from the
font specified on the
computer.
454
Cause No paper for the specified paper size.
Action Set the specified size paper.
Refer to "Loading Paper in the Trays 1 to 4" (P.249) or "Loading
Paper in the Tray 5 (Bypass)" (P.250).
Cause Printing is interrupted by a copy operation.
Action Cancel the interrupting operation.
Cause An error occurred on the machine.
Action Check the error details.
Cause In print options, the [Output Color] is set to [Black].
No Action Set [Output Color] to [Auto Detect] or [Color].
Cause The Finisher is not attached.
No Action A finisher is needed to perform stapling. Attach the Finisher, or
change the print option setting to cancel stapling.
Cause The number of pages to staple exceeds 50.
Action A maximum of 50 pages can be stapled. Reduce the number
of printed pages to 50 or less.
Cause The Duplex Kit is not attached.
No Action The Duplex Kit is needed for 2-sided printing. Attach the
Duplex Kit, or cancel stapling from the print option settings.
Cause The print page buffer is insufficient.
Action Add memory.
Cause The document size is different from the paper size in the
specified tray.
No Action Change the paper in the tray, or change the print option to
specify a tray that contains the correct size paper.
Cause The image is larger than the printable area.
No Action Expand the printable area, or reduce the document print area.
Cause The font replacement is set on the print driver.
No Action Check the font replacement table.