Other Settings (Ldap) - Fuji Xerox ApeosPort-VII C4421 User Manual

15 Authentication and Accounting Features
[System]
Searches the LDAP server using the qualification of the user who has been qualified to
search LDAP server.
Firstly register the user to give the qualification. Enter the required information on [Login
Name] and [Password].
Note
 Enter the login name by the DN method basically. Active Directory can accept attributes such as the
displayed name. For more information, refer to the official website of Microsoft Corporation.

If the LDAP server is set to accept searching of anonymous, leaving [Login Name] and [Password] blank
allows you to search anonymously.
9
Set the search scope of the directory tree.
Note

The entry specified here becomes the root for searching the user. Specify the entry of the tree the login user
belongs to. If too many users or groups are under the root entry, it may take a long time to log in to the
device. Set the appropriate search scope.
1) Tap [Search Directory Root] to enter the root entry of search in the DN method then tap
[OK].
2) Select the search scope at [Search Scope].
3) As needed, tap [Object Class of Search Target] to enter the object class name and then
tap [OK].
10
Set the software to be used on the directory server, as needed, at [LDAP Server].
11
As needed, define the search conditions or the attribute types.
Reference

For more information, refer to "[LDAP Server / Directory Service Settings]" (P.312).
12
Press the Home button then tap [Restart Now].

Other Settings (LDAP)

Encrypt the Communication Between the LDAP Server and the Device
1
Tap [Device].
2
Tap [Connectivity & Network Setup] > [Security Settings].
3
Tap [SSL/TLS Settings].
4
Set [LDAP - SSL/TLS Communication] to [Enabled].
5
Tap [<] > [<].
6
Tap [Remote Authentication / Directory Service].
7
Tap [LDAP Server / Directory Service Settings] > [Primary Server - Port Number].
374