Fuji Xerox ApeosPort-VII C4421 User Manual page 304

13 Advanced Settings
 [Port Number]
Enter a port number for SOAP.
Important
 Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, WebDAV, and Web
Services on Devices (WSD)).
[WebDAV]
 [Port Status]
Select [Enabled] when you use an application program such as Network Scanner Utility 3 to
access folders in the device.
Important

We recommend enabling [HTTP - SSL/TLS Communication] under [SSL/TLS Settings] when you use WebDAV.
This is an effectual way to avoid password leaking.
Note
 You cannot select [Port Number] and [Operation Timeout], if WebDAV port is disabled. To configure [Port
Number] and [Operation Timeout], enable port status and reboot the device, and then configure [Port
Number] and [Operation Timeout].
 [Port Number]
Enter a port number for WebDAV.
Important
 Do not use a number that is the same as a port number of another port. However, you can use the same port
number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP, WebDAV, and Web
Services on Devices (WSD)).
 [Operation Timeout]
You can enter an operation time-out period.
[ThinPrint]
 [Port Status]
You can use the device for print in the ThinPrint environment. The device decompresses and
prints the compressed print data sent from the server (Windows Server).
 [Port Number]
Enter a port number for ThinPrint.
Important
 Do not use any numbers assigned to the other ports.
Note
 ThinPrint is available when the communication protocol uses IPv4.
 The maximum of three connections are possible at a time.
[SFTP Client]
 [Port Status]
Set to [Enabled] to enable SFTP so that you can use the transferring with SFTP of [Scan]
feature.
304