Table of Contents
Advertisement
Reference
You can set the time until the memory full procedure is carried out. For more information, refer to "[Auto Job
Release]" (P.249).
[Maximum Stored Pages]
Set the maximum number of pages stored for a fax document.
[Mixed Size Originals Scan Mode]
Set the scan mode when the device scans documents of various sizes simultaneously with
the document feeder. If only documents of standard sizes are to be scanned, we
recommend that you select [Standard Size Mode].
Important
When [Standard Size Mode] is selected, image loss may occur if the following types of documents are
scanned:
Non-standard size documents
The document with a different size can not be mixed.
[Reduce / Enlarge Presets]
Set the magnifications displayed under [Reduce / Enlarge].
You can assign any magnification to the Reduce/Enlarge Preset buttons other than [100%]
and [Auto %].
[Original Size Defaults]
You can set the original sizes displayed in [Original Size].
You can assign original sizes to the buttons other than [Auto Detect].
If you frequently use non-standard size paper for scanning, setting non-standard size as the
default will save your time to specify the size each time.
[Local Terminal Information]
[Fax Name]
Register the sender name. The fax name is printed in the Transmission Header or Cover
Page.
[Internet Fax Control]
[Internet Fax Path]
[Via Email Server]
Sends email via an SMTP server.
[Direct (P2P)]
Directly sends to the device with the Internet Fax feature, without going through an SMTP
server.
Important
You cannot input both of the host name and the IP address specifications when sending for the same
destination.
The Internet fax will be printed only when the recipient's email address matches the email address set in the
sender.
[App Settings]
291
Advertisement
Table of Contents
