Table of Contents
Advertisement
13 Advanced Settings
Note
When a port is set to [Disabled], the corresponding items to the port do not appear.
Depending on the amount of data sent from the client, increasing the memory capacity may not change the
time taken to release the client.
[PostScript Memory]
Specify a value for the PostScript memory capacity.
[HP-GL/2 Auto Layout Memory]
Sets the memory area for task when using HP-GL/2 auto layout feature. When installing
storage, the storage is specified and cannot be changed. If the storage is not installed,
specify memory area for task.
[Job Ticket Memory]
Specify the amount of memory to use for job tickets.
[Receiving Buffer - LPD]
Set whether or not carry out spooling. The receiving buffer for spooling uses the storage.
Note
When set to [No Spooling], data cannot be received over the same interface from another client while LPD
printing is performed for one client.
You may not be able to change the [Receiving Buffer - LPD] setting because of the setting of [LPD Print
Queue]. For more information on LPD Print Queue, refer to "[LPD Print Queue]" (P.274).
[Receiving Buffer - IPP]
Set whether or not carry out spooling. The receiving buffer for spooling uses the storage.
Note
When set to [No Spooling], data cannot be received over the same interface from another client while IPP
printing is performed for one client.
[Delete Form]
Deletes the registered forms one by one. Specify the form number of each printer mode
and confirm the displayed form name then execute deletion.
[File Retention Period]
You can set expiration date for the file in a folder. To delete stored files automatically,
specify an expiration date and deletion time. The settings apply to all folders.
[Stored Job Retention Period]
You can set whether or not to automatically delete print files (Charge Print, Private Charge
Print, Secure Print, or Sample Print) stored in the device after the storing period expires.
Note
Selecting [Same as Files in Folder] refers to the [File Retention Period] setting.
[Display Default of Stored Print Job List]
Set the display method of the file list of stored print jobs (Charge Print, Secure Print, Sample
Set, Delayed Print, or Private Charge Print) to [List] or [Thumbnail].
270
Advertisement
Table of Contents
