Removal Procedure - Fuji Xerox ApeosPort-VII C4421 User Manual

18 Installing/Removing Optional Components
4
Press the power button to power the device on.

Removal Procedure

1
Press the power button and tap [Power Off Device] to switch off the power.
Make sure that the display on the control panel and all the lights are turned off, then
disconnect the power cord from the power outlet and the device.
 When using ApeosPort-VII C4421
 When using ApeosPort-VII C3321
2
Slide the latch on the rear left side in the direction of the arrow and lift it towards you.
462