Table of Contents
Advertisement
Symptom
The copy is too dark or
light.
The color of the document
and of the copy differ.
The copy is slightly
misaligned.
Part of the image is missing
on the copy.
The copy has a stripe
pattern.
The copy is misaligned or
skewed.
Copy black text. If the printout is too light, select [Text] for [Original
Type].
Reference
Refer to "[Original Type]" (P.132).
Execute auto calibration.
Reference
Refer to "Executing Calibration" (P.406).
Set the suitable value for [Original Type].
Reference
Refer to "[Original Type]" (P.132).
Copy black text. If the printout is too light, select [Text] for [Original
Type].
Reference
Refer to "[Original Type]" (P.132).
Align the paper edges, and adjust them to the tray's top corners to
reload the paper.
Reference
Refer to "Loading Paper" (P.87).
The copy may become partially or unclear if the loaded paper is
damp. Replace the paper with a new one.
Check if the loaded paper has no crease or wrinkle. Otherwise,
replace all of the paper with a new one.
If the original is a stuck or folded sheet, the pasted or folded section
may not be laying flat on the document glass.
Place a stack of white sheets on top of the document to flatten the
document against the document glass.
Vertical stripes may be printed on the copies depending on the ratio.
Adjust the ratio to eliminate the stripes.
Reference
Refer to "[Reduce / Enlarge]" (P.131).
Load the document correctly.
Reference
Refer to "Loading Originals" (P.99).
Load paper correctly and align the document guides to the edges of
the original.
Reference
Refer to "Loading Originals" (P.99).
Firmly push in the tray until it stops to set it properly.
Reference
Refer to "Loading Paper" (P.87).
When using Tray 5 (Bypass), load paper correctly, and align the
paper guides to the paper edges.
Reference
Refer to "Loading Paper in Bypass Tray" (P.93).
Trouble during Copying
Remedy
427
Advertisement
Table of Contents
