When "Switch The Machine Off" Is Displayed; When The Print Output Is Not As You Expected - Fuji Xerox DocuCentre-II 3005 Administrator's Manual

16 Problem Solving
The directory tree name is not
configured.
The context is not set.
Connected to a different printer
object.
The NetWare port on the
machine is not set to "Enable".
The file server is down.
There is another device on the
network with an identical device
name.
The NetWare port is not
functioning.
16
*:Refer to NetWare Online Documentation for configuration and operations.

When "Switch the machine off" is displayed

A NetWare problem occurred.

When the print output is not as you expected

The print language of the print
data and the print language
configured on the machine are
different.
156
Cause
Print out [System Settings List]
to confirm if the tree name is
specified.
Print out [System Settings List]
to confirm if the context is
specified.
Use NWADMIN from a computer
to confirm if the correct object is
assigned using the layout
information of the print server.*
Print out [System Settings List]
to confirm if the NetWare port is
enabled.
Search for the file server using
[Network Neighborhood].
Switch off the machine and use
NWADMIN from a computer to
confirm that the status of the
printer object is "Standby".
Print out [System Settings List]
to confirm if the network number
is left to "0000000" (NetWare
server is down) if using IPX/
SPX. If using TCP/IP, confirm if
the IP address is left to "0.0.0.0"
(static address unspecified, or
the DHCP server is down).
Cause
Cause
Confirm the print language on
the machine.
Check point
Set the tree name.
Set the context.
Use Driver CD Kit CD-ROM from
a computer to correctly set the
file server name/tree name/
context/active mode.
Use the CentreWare Internet
Services from a computer to
correctly set the file server
name/tree name/context/active
mode.
Enable the NetWare port.
Start the file server.
Use the Driver CD Kit CD-ROM
from a computer to set a
different device name.
For the case of IPX/SPX, start
the NetWare server. For the
case of TCP/IP, either set a
static IP address or start the
DHCP server.
Check point
Restart the machine.
- Switch on the machine after the
display completely disappears.
Check point
Match the print language of the
print data and the print language
configured on the machine.
Remedy
Remedy
Remedy