Table of Contents
Advertisement
[Button Color Scheme]
If [Highlight] is selected, the Start, Pause, and Reset buttons common to all screens will be
highlighted.
[Screen Brightness]
Adjusts the brightness of the touch screen.
Note
The screen image on the bottom of the adjustment slider is a display sample.
[Reconfirm Email Recipient]
Select whether or not to display the screen to confirm email recipients when sending
emails.
[Reconfirm Fax / Internet Fax Recipient]
Set whether or not to display a screen to confirm fax/Internet fax recipients when sending
faxes/Internet faxes.
[Display Supplies Screen]
Allows you to select whether or not to display the consumables status when a replacement
is required.
[Screen After Inserting USB]
Set whether or not to display the screen when the device detects USB memory device
insertion, and also set the screen type at the time.
Note
Selecting [App Selection Screen] displays the screen that prompts you to select either of [Scan to USB], [Print
from USB], and [Photo Print] when a USB memory is inserted.
When the device is powered on while a USB memory device is inserted, the Home screen appears. The screen
to select the app does not appear.
During the Power Saver mode, the touch screen does not light up even when a USB memory device is inserted
into the USB memory slot . After exiting the Power Saver mode, insert the USB memory device again or select
the app to use on the Home screen.
If a commercially available Memory Card Reader is used and it is left inserted all the time, the screen is not
switched to the selected screen even when a medium is inserted into the slot of the Memory Card Reader.
[Display Warning Screen After Inserting USB]
Set whether or not to display the confirmation screen when a USB memory device is
inserted into the USB memory slot.
[Keyboard Input Restriction]
Set whether or not to allow only the ASCII format or not for the available characters of the
keyboard displayed on the touch screen.
[Operation of Up / Down Buttons]
Allows you to select whether or not to enable continuous scrolling when pressing the scroll
buttons.
[Double-tap Interval]
Set the interval that a double tap is recognized when the touch screen on the device is
double-tapped.
[System Settings]
253
Advertisement
Table of Contents
