Fuji Xerox ApeosPort-VII C4421 User Manual page 418

17 Problem Solving
Symptom
The Data LED does Is the interface cable connected?
not blink even though
you instructed the
device to print.
Is the required port status set to
[Enabled]?
Paper is not fed from Is the specified size paper loaded in
Tray 5. the tray?
Unable to print text Non-standard fonts are used for
correctly. (Text is printing.
garbled.)
Unable to copy with Is the document glass or the
the specified size. document cover dirty?
Is the original a transparent type
such as a transparency film?
Is the original in the correct
position?
Is the original loaded correctly?
Are the document guides on the
document feeder set in the correct
positions?
Is the original folded?
Is the original a non-standard size?
Paper is often Is the paper loaded correctly in the
jammed or wrinkled. tray?
Is the paper tray inserted correctly? Firmly push in the paper tray until it stops to insert it
Is the paper damp?
418
Cause
Check the interface cable connection.
Reference
Check the status of the port to use, and then set the
port status to [Enabled].
Reference
Follow the instructions displayed to load paper of
correct size, and then try again.
Reference
Check the application or print driver settings. If
PostScript (optional) is being used, download the
required fonts.
Clean the document glass and the document cover.
Reference
Place the original on the document glass, and place a
white sheet on top of the original when copying.
Load the original correctly.
Reference
Adjust the document guide positions.
Reference
Unfold and correctly load the original.
Reference
Specify the document size.
Reference
Load the paper correctly.
Reference
correctly.
Reference
Replace the paper with new one.
Reference
Remedy

Refer to "Interface Cables" (P.35).

Refer to "[Port Settings]" (P.300).
 Refer to "Loading Paper in Bypass Tray" (P.93).
 Refer to "Cleaning Document Cover and Document Glass" (P.403).
 Refer to "Loading Originals" (P.99).
 Refer to "Loading Originals" (P.99).

Refer to "Loading Originals" (P.99).

Refer to "Loading Originals" (P.99).

Refer to "Loading Paper" (P.87).

Refer to "Loading Paper" (P.87).

Refer to "Loading Paper" (P.87).