Table of Contents
Advertisement
16 Problem Solving
The data has been sent to
the machine.
The Print Result is Not What was Expected
Follow the procedure below if the print result is not what was expected.
Documents are not
stapled.
16
The 2-sided printing is not
available.
The document is printed
with a different paper size.
The document edges are
missing on the output.
460
No
Cause
Action
Cause
Action
Cause
Action
Cause
Action
Cause
No
Action
Cause
Action
Cause
No
Action
Cause
Action
Cause
No
Action
Cause
No
Action
Out of paper.
Supply paper to the machine.
No paper for the specified paper size.
Set the specified size paper.
"Loading Paper in the Trays 1 to 4" (P.239), or
Refer to "Loading Paper in the Tray 5 (Bypass)" (P.240).
Printing is interrupted by a copy operation.
Cancel the interrupting operation.
An error occurred with the machine.
Check the error details.
The Finisher is not attached.
The Finisher is needed to staple documents. Attach the
Finisher, or change the print option setting to cancel
stapling.
The number of pages to be stapled exceeded 50.
A maximum of 50 pages can be stapled. Reduce the
number of printed pages to 50 or less.
The Duplex Kit is not attached.
The Duplex Kit is needed for 2-sided printing. Attach the
Duplex Kit, or cancel stapling from the print option settings.
The print page buffer is insufficient.
Add memory.
The document size is different from the paper size in the
specified tray.
Change the paper in the tray, or change the print option to
specify a tray that contains the correct size paper.
The image is larger than the printable area.
Expand the printable area, or reduce the document print
area.
Advertisement
Table of Contents
