Step5 Setting To Use Ldap Server For Remote Authentication - Fuji Xerox ApeosPort-VII C4421 User Manual

15 Authentication and Accounting Features

Step5 Setting to Use LDAP Server for Remote Authentication

Set the attribute to be collated with the smart card ID and the attribute used to identify the
user after the authentication.
1
Tap [Device] on the Home screen.
2
Tap [Connectivity & Network Setup] > [Remote Authentication / Directory Service].
3
Tap [LDAP Server / Directory Service Settings] > [Attribute of Smart Card].
4
Enter the attribute name to be collated with the smart card ID then tap [OK].
Note

You need to set previously the card ID to the attribute.
 Set the attribute surely unique to each user.
5
Tap [Network User ID Attribute].
6
Enter the attribute to become the user display name or identifier at the smart card login,
then tap [OK].
Note
 Set the attribute surely unique to each user.
 When the device fails to retrieve the attribute set here from the LDAP server, the user cannot log in.
7
Press the Home button then tap [Restart Now].
382