Table of Contents
Advertisement
16 Maintenance
Cleaning the Device
WARNING
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never
use aerosol cleaners to avoid catching fire and explosion.
CAUTION
When cleaning this product, always switch off and unplug it. Access to a live
device interior may cause electric shock.
Cleaning the Exterior
Important
Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the device as they
might discolor, deform, or crack covers.
Cleaning the device with an excessive amount of water may cause the device to malfunction or damage
paper sheets.
1
Wipe the exterior with a firmly wrung soft cloth moistened with water.
Important
Do not use cleaning agents other than water or neutral detergent.
Note
If you cannot remove the dirt easily, gently wipe the device with a soft cloth moistened with a small amount
of neutral detergent.
2
Wipe off any excess water with a soft cloth.
Cleaning the Interior (LED Printheads)
Normally, clean the LED printheads when you replace a drum cartridge or the waste toner
container. However, if you have image quality problems such as white or colored stripes
appearing on outputs, clean the LED printheads.
1
Make sure that the device is not operating, and open the right door.
398
Advertisement
Table of Contents
