Table of Contents
Advertisement
Setting Item
Item Number
Print control
(Blank sheet
output)
(Character
print area)
(Image
enhancement)
ESCP switch
(Text quality)
(Reduced
characters)
(Page length)
(1-Inch
perforation
(Paper feed
position)
(CR feature)
51
Sets whether to print blank pages if included in the document.
[0](Default): Off
[1]: On
Note
Even when [Off] is selected, blank pages are printed if they are spaces created with
user-defined characters or images in white color.
When [Off] is selected for this feature and 2 Up or 2 sided printing is specified,
blank pages are not printed.
52
Extends the position of the right margin.
[0](Default): Standard
[1]: Extended
Important
Changing the character print area from [Extended] to [Standard] restores the left
and right margins to the default values.
When the position of the right margin is set here, that position becomes the right
edge of the character print area.
53
Image Enhancement smoothens the border between black and white,
reducing rough edges, and thus seemingly increasing the resolution.
[0]: Off
[1](Default): On
55
Sets the Text Quality mode to high quality or draft.
[0](Default): High Quality
[1]: Draft
Important
Since the default value is selected for the [Text Quality], [Reduced Characters],
[Character Code Table], [Page Length], and [1-inch Perforation Skip] features, their
settings will not be affected when an extended command is received.
Note
Changing settings does not change actual printing quality.
This setting affects the Text Quality selection commands. For more information
on the Text Quality selection commands, contact our Customer Support Center.
56
Reduces the size of single-byte alphanumeric characters when printing. Sets
whether to reduce their sizes or to print them at a scale of 100%.
[0](Default): Off
[1]: On
58
Sets the length of a page (printable area) to 11 inches or 12 inches.
[0](Default): 11 inches
[1]: 12 inches
59
Sets whether or not to leave a 1-inch space between pages.
[0](Default): Off
[1]: On
skip)
Important
This is effective only when CSF under [Paper Position] is set to [Off].
60
Sets the position to start printing at 8.5 mm or 22 mm below the top edge of
paper.
[0](Default): 8.5 mm
[1]: 22 mm
61
Sets the action to be executed when a CR command is received.
[0](Default): Carriage return
[1]: Carriage return and linefeed
Value
Emulation
485
Advertisement
Table of Contents
