Table of Contents
Advertisement
19 Appendix
Parameter
Item No.
Print control
(HP-GL mode)
(Hard clip)
command SP)
command SPO)
command NR)
command FR)
command PG)
command AF)
command AH)
(Scaling)
(Scaling mode)
502
150
Selects a graphics language. This setting affects to IW, OW, and UC of HP-
GL/2 commands.
[0] (Default): HP-GL
[1]: HP-GL/2
Note
To print HP-GL/2 command that does not include BP command, select [HP-GL/2].
151
Sets the size of hard clip area.
In HP-GL mode, the plottable area is determined in line with the paper size,
apart from the printable area. This area is called the "hard clip area", and
determines the maximum range of pen movement. Accordingly, images
cannot be drawn outside the boundary of the hard clip area.
[0]: Standard
[2] (Default): Paper
152
Sets the command that indicates the end of plotting. When the command
(Eject
specified here is received, plotting is terminated and the paper is output.
[0] (Default): OFF
[1]: ON
153
The default value is [ON] for SPO, and [OFF] for the others.
(Eject
Note
If multiple commands are specified, when one of the commands is received,
154
plotting is terminated and the paper is output.
(Eject
155
(Eject
156
(Eject
157
(Eject
158
(Eject
159
Sets whether the original size is enlarged or reduced so that the document
size fits the paper size.
[0]: OFF
[1] (Default): ON
160
Selects the document size for auto scaling: A series paper (A0, A1, A2, A3, A4,
and A5) or the active coordinate area which is determined accordance with
the setting selected in Area Determination Mode.
[0] (Default): Paper Size
[1]: Active Coordinate Area
Note
[Active Coordinate Area] can be selected only when [Auto layout] is set to [ON].
When [OFF] is selected, [Scaling mode] becomes [Paper Size].
The setting of the scaling mode is valid when [Document size] is set to [Auto].
Value
Advertisement
Table of Contents
