[Device's Email Address / Host Name] - Fuji Xerox ApeosPort-VII C4421 User Manual

 [IPv6 - DNS Server Setup]
Set the DNS server for IPv6.

[Get IP Address from DHCP]
Set whether or not to automatically obtain the address of the DNS server from the DHCP
server.

[Preferred DNS Server], [Alternate DNS Server 1], [Alternate DNS Server 2]
When you clear the [Get IP Address from DHCP] checkmark, manually set the DNS server
address.
Specify alternate DNS server addresses for [Alternate DNS Server 1] and [Alternate DNS
Server 2].
 [Automatically Configured IPv6 Address]
Displays the automatically assigned IP addresses.
Note
 When setting a manual IP address, auto stateless addresses that are automatically assigned are up to 2.
 [IPv6 - IP Filter]
Select whether or not to limit the IPv6 addresses that can access the device.
Note
 [IPv6 - IP Filter] applies to all features using TCP/IP, such as printing, Scan to Folder, CentreWare Internet
Services, and Web Applications services.

To set the IPv6 addresses that the device accepts connection from, use [IP Filtering] in CentreWare Internet
Services. For more information, refer to the help of CentreWare Internet Services or refer to "Using
CentreWare Internet Services" (P.84).
 When [IP Filtering] is enabled, make sure to switch the FTP transfer mode to [Active Mode] to transfer the
scanned image from the device via FTP. You can switch the FTP transfer mode from CentreWare Internet
Services.
[Ping Connection Test]
Allows you to confirm whether the device connects your computer properly or not with the
configured condition.
[Print Network Protocol Report]
Allows you to print a list of protocol settings of the primary interface.

[Device's Email Address / Host Name]

[Email Address]
Enter the email address of the device with up to 128 characters.
 When receiving Email via SMTP
You can set any name for the account (on the left side of @). Set the address section (on
the right side of @), with the combination of the host name and domain name. An alias
cannot be set.
Example: mymail@myhost.example.com
 Account name: mymail
 Host name: myhost
 Domain Name: example.com
[Connectivity & Network Setup]
307