[Original Size]; [Book Faxing]; [Priority Send]; [Delay Start] - Fuji Xerox ApeosPort-VII C4421 User Manual

[Original Size]

You can specify the scan size for fax transmission.
Use this feature when you scan a non-standard size original, or when you want to at a size
different from the original size.
Note
 You can change the default values for buttons other than [Auto Detect] in the System Administration mode.
For information on how to change the default values, refer to "[Original Size Defaults]" (P.288).
 If the size of original cannot be detected automatically, a screen to enter the size appears.
 The size of original that can be automatically detected depend on [Paper Size Settings] in the System
Administration mode. For information on [Paper Size Settings], refer to "[Paper Size Settings]" (P.263).

[Book Faxing]

You can scan the left and right pages of a bound document separately to fax them.
Load the original on the document glass.
Note

A non-standard size original or undetectable-size original may not be separated into two accurately.

[Priority Send]

The Priority Send feature allows you to give priority to a fax or polling job over other jobs.
Note

If the Priority Send feature is selected during transmission, the fax will be sent after the current transmission
ends.
 In redial mode, the fax will be resent preferentially after the specified redial interval.

The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-polling jobs.

[Priority Send] can be set in combination with [Delay Start]. If both features are set, Priority Send is performed
at the time specified in [Delay Start].
Reference

You can give priority to a pending job. For more information, refer to "Jobs" (P.219).

[Delay Start]

This feature allows you to send a fax at your specified time.
Important

If you send a fax after the specified time, the stored document will be sent at the specified time on the
following day.
Note

You can specify a time within 24 hours. You cannot specify a date.
 If the fax cannot be sent at the specified time because, for example, the telephone line is busy, it will be sent
as soon as the line becomes available.
 You can change the default value of [Specific Time] in the System Administration mode.
Features List
153