Table of Contents
Advertisement
[Ink Setoff Prevention]
Set whether or not to activate the function to prevent the adhesion of sheets of paper.
[Copy Image Quality]
Set how much to reduce the roughness of the copied image.
[Coated Paper Print Mode]
Set whether to focus more on the speed or the image quality on the printing.
[Clean Developer Unit and Transfer Module]
After the device has been remained with powered on but not perform printing for a certain
period, the background of the print result may have some unwanted colored parts. To
improve this fault, clean the Developer Unit and the Transfer Module.
[Toner Density Settings]
Adjusts the amount of toner to consume when printing. Reducing the density saves toners
and increasing makes the printed image clearer.
[Refresh Toner]
Re-adjusts the toner density and the developer voltage. Refreshing toners optimizes the
print quality.
Note
Do not perform Refresh Toner too many times as the toner would decrease at a fast pace.
[Clean Transfer Belt]
If dust stick to the Transfer Belt, the black or colored vertical stripes or lines may appear on
the printed image. To improve this fault, clean the Transfer Belt.
[Primary Transfer Current Adjustment]
Adjusts the transfer voltage of the black toner and color toner when a poor transfer due to
paper type or environment causes missing a part of image.
[2 Sided Color Scanning Calibration]
When the image is color scanned by the duplex automatic document feeder, you can
calibrate the color of the image on 2 sided side 1 and side 2.
Reference
For more information, refer to "Executing 2 Sided Color Scanning Calibration" (P.408).
[Adjust Color Registration]
You can adjust color registration if colors are misaligned in outputs.
Important
Do not execute color registration continuously. Doing so may impair the performance of the device.
[Maintenance]
245
Advertisement
Table of Contents
