Table of Contents
Advertisement
19 Appendix
Setting Item
Item Number
Position
adjustment
(Vertical
position
adjustment)
(Horizontal
position
adjustment)
Escape sequence
(Escape
sequence)
(Escape
sequence
character)
Form overlay
Bypass Tray -Wait
User
Form Type
Binary character
strings
0 Style
Number of sets
486
15
Adjusts the printing position vertically or horizontally, and changes the
positions of the margins.
[0](Default): Off
[1-500]: -250 to +250 mm
16
Important
Data outside the printable area is not printed regardless of the adjustment of the
print position. In addition, data moved outside the printable area as a result of
adjusting the print position is not printed.
62
A normal extended command is specified starting with hexadecimal 1BH ESC
as the escape sequence identifying the command, followed by ; (3BH). When
you cannot use a semicolon or ESC code with the host computer, you can use
a special string instead as an escape sequence. This setting specifies whether
or not to enable the escape sequence replacement feature. When enabling,
specify the escape sequence with item 63.
[0](Default): Disabled
[1]: Enabled
Reference
For more information on extended commands, contact our Customer Support Center.
63
To control an extended command with a text code, you must specify an
escape sequence (the first two bytes) of the extended command. Enter two
characters using the keyboard displayed on the screen.
[&%](Default): 0x21 - 0x7e
64
Constantly performs Form Overlay by selecting a form name (No. 01-64)
registered on the device.
[0](Default): Off
[1-64]: No. 1 - No. 64
Important
Since the default value is selected for this feature, this setting is not affected when
an extended commend is received.
Once a form name is selected, it continues to be displayed even if the form is
deleted.
67
Sets whether to suspend the print processing when feeding paper from the
bypass tray. Processing is resumed by a user operation on the device.
[0]: Off
[1](Default): On
68
[0](Default): ESC/P-K
72
Sets the character strings to be specified when entering commands in
hexadecimal format.
[0](Default): OFF
[1]: &$%$
[2]: $?!#
73
Sets the typeface for "0".
[0](Default): 0
[1]:
74
Sets the method of specifying the number of print sets.
[0]: Protocol
[1]: Panel
[2](Default): Command
Value
Advertisement
Table of Contents
