Table of Contents
Advertisement
2 Setup
8
Connect to the Wi-Fi network using one of the following methods.
Note
You can check the settings configured for Wi-Fi feature in a Configuration Report.
Method
*1
From the list
*1
Manual connection
Using WPS (push button)
*2
Using WPS (PIN code)
*1 : The SSID of the wireless LAN access point and authentication information (such as WEP key and passphrase) are required.
For more information on the wireless LAN access point, ask your system administrator or network administrator.
*2 : The wireless LAN access point must support WPS. For information on the WPS operation on the wireless LAN access point,
refer to the manuals for the wireless LAN access point.
Selecting WLAN Access Point from the List
1
Tap the SSID of the desired wireless LAN access point from the list displayed on the [Wi-Fi
Connection Settings] screen.
Note
If the wireless LAN access point does not set security, the setting is now complete.
Up to five wireless LAN access points are listed with the strongest access point first.
2
If the wireless LAN access point sets security, the authentication information screen
appears. Enter the required information and tap [OK].
Note
When you select an access point and the device has already been connected to another access point, the
screen to confirm whether to cancel the connection appears. Tap [Yes].
3
After you confirm the update, tap [OK].
The device reboots and the setting becomes effective.
Connecting to WLAN Network Manually
1
Tap [Manual Settings] on the [Wi-Fi Connection Settings] screen.
2
Set required settings for your environment, and then tap [OK].
Setting Items
SSID:
Communication Mode
Encryption
No Encryption
Settings
42
Select the desired SSID (name to identify the Wi-Fi
network) from the list of wireless LAN access points
and connect.
If the desired SSID is not displayed in the list, specify
the SSID and connect to the Wi-Fi network.
*2
After sending a connection request from the device,
press the WPS button on your wireless LAN access
point within two minutes.
Enter the PIN code displayed on the device to your
wireless LAN access point within two minutes.
Settings
Description
Set the name to identify the Wi-Fi network. You can use up to
32 alphanumeric characters.
Select either [Infrastructure] or [Ad-hoc]
Does not set encryption.
Reference
(P.42)
(P.42)
(P.43)
(P.43)
*1
.
Advertisement
Table of Contents
