Table of Contents
Advertisement
[Memory Full Procedure]
If the shortage of storage occurs while scanning an original, a screen appears asking how
you want to handle the partially stored data.
Set the process you want the device to perform for the partially stored data after a certain
time has elapsed in the confirmation screen.
Reference
You can set the time until the memory full procedure is carried out. For more information, refer to "[Auto Job
Release]" (P.249).
[Maximum Stored Pages]
Set the maximum number of pages stored for a fax document.
[Mixed Size Originals Scan Mode]
Set the scan mode when the device scans documents of various sizes simultaneously with
the document feeder. If only documents of standard sizes are to be scanned, we
recommend that you select [Standard Size Mode].
Important
When [Standard Size Mode] is selected, image loss may occur if the following types of documents are
scanned:
Non-standard size documents
The document with a different size can not be mixed.
[Fax Data in Folder Priority 1] to [Fax Data in Folder Priority 5]
Set the priority to display the fax information received using folders. For instance, when
using Network Scanner Utility 3, the fax information is displayed in the [Recipient] section
of the file list screen.
There are priority levels from 1 to 3. All priority can be set, however, if you want to display
only one priority level, make the settings of all priority levels the same.
[Direct Fax]
Set whether or not to receive a fax, which is instructed using a fax driver from a computer.
When you select [Disabled], the Direct Fax feature becomes unavailable.
[Block Inbound Faxes]
Set a G3 ID (fax number) from which you want to reject a fax reception.
Note
You can find the G3 ID of the sender that you want to reject in "Remote Station" column of an Activity Report
or "Input Source" column of a Job History Report.
[Block Unknown Fax Numbers]
Set whether or not to receive faxes from unknown G3 ID fax numbers.
[Fax Received Options]
Allows you to specify a method for classifying received fax documents into specified
folders.
Note
When you enable both folder selector features, classifying by [Folder Selector by Telephone Number / G3 ID]
takes precedence.
Reference
For the setting to activate the folder selector feature, refer to "[Folder Selector by Telephone Number]"
(P.286) or "[Folder Selector Setup]" (P.286).
[App Settings]
287
Advertisement
Table of Contents
