Operations During Scanning; Stopping The Scan Job; Scanning The Next Original; Confirming The Job State - Fuji Xerox ApeosPort-VII C4421 User Manual

7 Scan

Operations during Scanning

The following operations are available in the scanning screen.

Stopping the Scan Job

1
Tap [Pause] or [Delete].
Note
 A message is displayed when there are documents remaining in the document feeder. Follow the instruction
on the screen to remove the documents.

Scanning the Next Original

1
Tap [On] under [Next Original].
Note
 When you put a check mark for [Next Original] in the features list, the screen in Step 2 appears.
2
You can perform the following operations displayed in the confirmation screen.
Scanning the Next Original
1) Load the next original.
2) Tap [Scan Next Original].
Changing the Settings for the Next Original
1) Load the next original.
2) Tap [Edit Next Original Settings].
3) Change the settings in the features list.
Reference

For information on the features list, refer to "Features List" (P.182).
4) Tap [Scan].
3
When all originals have been scanned, tap [Save (Last Original)].

Confirming the Job State

1
Tap [Jobs].
The [Jobs] screen appears.
Reference

For information on job status, refer to "Jobs" (P.219).
176