Trouble During Printing; Unable To Print - Fuji Xerox ApeosPort-VII C4421 User Manual

Trouble during Printing

Unable to Print

Data remains in the printer
icon on the computer.
More than specified numbers
of the print sets are
processed and printing never
ends. Or the print result is
garbled.
The data has been sent to
the device.
Symptom
If the device is not powered on, switch the power on.
Reference
Check if the network cable is connected to the computer.
Check if the network cable is connected to the device.
Reference
If an error occurs in the device, check the error details and take
appropriate action.
Set the correct IP address.
Reference
The network between the computer and the device may be
abnormal. Consult your network administrator.
Enable the port that the print driver uses.
Reference
The storage capacity of the device is insufficient. Reduce
unnecessary data from files in folders or stored documents (Charge
Print, Private Charge Print, and Secure Print) to increase free space.
Wait for a while, and then try printing again.
Use the appropriate printer driver. Check the property screen of the
printer driver to confirm that your device's name is displayed for
the driver name on the [Advanced] tab. The operation is not
guaranteed when using the third party's print driver.
If the tray is out of paper, add paper.
Load paper of the size specified.
Cancel the interrupting operation of copy.
If an error occurs in the device, check the error details and take
appropriate action.
If the job is being suspended, specify whether to cancel it.
Check secure print jobs on the device.
Reference
 Refer to "Power Source" (P.32).

Refer to "Interface Cables" (P.35).

Refer to "Setting the IP address" (P.36).
 Refer to "[Port Settings]" (P.300).
 Refer to "Secure Print" (P.108).
Trouble during Printing
Remedy
429